We have created what we believe is "The Ultimate Wall Tent". The Kwik Kamp Outfitter Wall Tent is loaded with unique features. These tents are built with today's quality fabrics and are assembled utilizing the latest technology in computer aided design and manufacturing.
All of our tents finish at the full floor size, providing you with a tent that is larger than the competition's "cut size" tents. In other words, you get more tent for your dollar!
The Outfitter Tent is made out of 10.10 oz. Army Duck material that is treated to be water resistant, mildew resistant and flame resistant. After treatment, the Army Duck actually finishes at approximately 12 oz. per square yard.
The corners and peak of the Outfitter Tent are reinforced with a high strength 40oz. industrial vinyl. These reinforcements are designed so that they may accept attached frame work when a Cook Shack or Porch is added (without having to have a permanent hole in the peak or eaves or your tent). This feature makes our tents modular, allowing you to add a section at anytime without modification to your existing tent.
The door of the Outfitter Wall Tent is far superior to the average tent door. Our doors have a one foot overlapping flap to protect the zipper from the weather. They also include Fastex side release buckles on the inside of the door as well as the outside (so you don't have to reach through). The zippered portion of the door extends all the way to the ridge allow door to be fully opened. These doors come standard with straps and Fastex buckles on both side to "tie-back" each flap for fully opened front door when desired.
One of the most important features integrated into the Outfitter Wall Tent is the seam. We use what is called a double lap felled seam. The material is actually rolled in an interlocking fashion and sewn with a double stitch, leaving it much stronger and more water repellent than the typical flat stitched seam. There are no raw edges exposed, which also makes for a more attractive tent.
Our tent comes standard with either a 5" or 6" silicone stove jack with flap (placed wherever you like), zippered front door with Fastex buckles inside and out, one foot overlapping flap on door, 10" sod cloth (dirt apron around bottom perimeter of tent), outrigger ropes with tensioners, and a tent bag.
We offer a variety of other options that you may add to your tent such as a vinyl floor, additional rear door, tie in screened door, vinyl fly, wall dividers, reinforced ridge, and windows.
(scroll down for links to tent & options pricing)
Our doors have a one foot overlapping flap to protect the zipper from the weather. They also include Fastex buckles on the inside of the door as well as the outside. The zipper portion of the door extends all the way to the ridge to allow the door to be fully opened ("tie-back" buckles included to hold doors flaps open when desired).
The corners and the peak are reinforced with a high strength 40oz. industrial vinyl patch. These reinforcements are designed so that they may be altered to accept attached frame work when a Cook Shack or Porch is added. Once the reinforcements have been modified, they will still remain closed when not in use.
Our canvas wall tents come with all ropes and tensioners necessary to stake the outside of your tent. Once cut to your desired length, they are secured to the eave through the grommet and staked to the ground. The tensioner can then be used to tighten or loosen the outrigger ropes as needed (simply by pushing it towards or away from the tent).
The Stove Jack is made out of a fire proof fiberglass material with a silicone stove pipe ring. The stove jack has a Velcro flap to close the hole when stove jack is not in use. Available in 5" or 6" and can be custom placed where you choose at no additional cost.